Disposing Of Paper Scrap - FujiFilm ASK-400 User Manual

Printer Installation

Disposing of paper scrap

Paper scraps generated when the paper is cut are collected in the scrap box� Be sure to empty the
scrap box when replacing the paper�
1
Release the opening lever, and pull out the mechanism unit�
2
Lift the paper lever and raise the front cover�
3
Hold the center of the scrap box and lift it up straight�
4
Set the scrap box and close the front cover�
5
Close the mechanism unit�
Caution
• Never remove the scrap box diagonally� The scrap box may be damaged and the product
may not operate normally�
• When the scrap box has been removed, do not touch the cutter on the upper part or you
may be cut�
• Troubles may occur if the printer is used when the scrap box is full�
- 20 -
Scrap box