Paper Tray Installation - FujiFilm ASK-400 User Manual

12
Close the mechanism unit�
When the mechanism unit is closed, the printer
starts paper initialization� (Five blank sheets
are output�) Paper initialization cuts off the
outer layer of the paper that may be dirty� Note
that paper initialization is not carried out if the
printer ON/Standby switch is set to ON after the
paper is set�
Caution
• Make sure that the scrap box is installed when printing. If not installed, your fingers may get
caught in the moving parts and be injured�
• If different width media (for example L-size and PC-size) are used on the same printer,
problems with the print quality such as lines on the print could arise� Therefore, do not mix
the use of different width media on one printer.

Paper tray installation

You may install the paper tray when using L or PC size paper rolls�
Up to 50 sheets can be stored, however it is recommended to remove the sheets regularly�
1
Attach the paper tray to the scrap box�
2
Lower the paper tray to set it�
Caution
• Storing too many sheets may cause a malfunction�
• Do not apply too much strength on the paper tray� Otherwise, it may be damaged�
- 19 -
Printer Installation
Insert the tray horizontally�