Specifications - Christie Roadie 25K Specifications

Christie Roadie 25K
DISPLAY TECHNOLOGY
AND RESOLUTION
3-chip 1.25" Darkchip3™ DMD™
•
2048 x 1080
•
BRIGHTNESS
8000 – 25,000 ANSI lumens (± 10%)
•
90% brightness uniformity across the
•
screen
CONTRAST RATIO
High Brightness lens: 1600:1 on/off
•
High Contrast lens: 1800:1 on/off
•
ANSI Contrast, both lenses: 650:1
•
High Contrast optional aperture: 2800:1
•
INPUT LINE VOLTAGE
Ballast: 3-phase 200-230 VAC ± 10% @
•
50/60 Hz (max 24A per phase)
3-phase 380-415 VAC ± 10%
•
@ 50/60 Hz (max 12.5A per phase)
Projection Head: Single-phase 200 VAC
•
to 240 VAC ± 10% @ 50/60 Hz
Single-button direct key access, auto
set-up and power-up put real control
at your fingertips.
COLOR PROCESSING
10-bit digital processing
•
SCAN RATES
Horizontal – 15 kHz to 120 kHz
•
Vertical – 23.97 Hz to 150 Hz
•
EXTRACTION FAN
8"exhaust port located at the projection
•
head for extraction of hot air; extraction
fan is required (min 600 cfm at projector)
VIDEO DECODER
Built-in multi-standard video decoder
•
(NTSC, NTSC4.43, PAL, PAL M, PAL N,
PAL 60, SECAM)
LAMP
Xenon bubble lamp, field replaceable
•
High brightness: CDXL60, CDXL45,
•
CDXL30 and CDXL20
Standard lamps: CXL60, CXL45, CXL30
•
Lamp life: 600 – 2400 hours (depending on
•
lamp model)
Auto LampLOC™ – automatic, for
•
optimized brightness and uniformity
POWER SUPPLY
Separate 7kW low-ripple switch mode
•
lamp ballast
For the most current specification information, please visit www.christiedigital.com
Copyright 2005 Christie Digital Systems, Inc. All rights reserved. All brand names and product names are trademarks,
registered trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001:2000 certified.
The DLP™ logo and DLP™ Medallion are trademarks of Texas Instruments.
Performance specifications are typical. Due to constant research, specifications are subject to change without notice.
Printed in Canada. 2103
Aug 06-NA

Specifications

INPUTS, CONTROL
& NETWORKING
RGBHV/YPbPr: 5 BNC
•
DVI-I: digital/analog RGB/YPbPr
•
Dual SD/HD-SDI module
•
One composite video, one S-Video
•
2 RS-232 ports and 3 RS-422 ports
•
On-board ChristieNET™ connectivity
•
(RJ45)
IR remote, built-in backlit keypad/
•
status display
LENS MOUNT
Manual operation for focus, zoom
•
and horizontal and vertical offset
WEIGHT
Projection head (approx): 260 lb (118.2 kg)
•
Ballast (approx): 110 lb (50 kg)
•
Optional FredFrame (approx): 105.4 lb
•
(47.9 kg) with Fork Lift Tubes and Castors
Optional rigging frame – constructed of
2" aluminum tubing for strength.
STANDARD ACCESSORIES
IR keypad w/batteries
•
Line cord
•
Dual SD/HD-SDI module
•
User manual
•
OPTIONAL ACCESSORIES
Extraction Fan Kit (mandatory)
•
High Brightness lenses: 1:1, 1.25-1.45:1,
•
1.45-1.8:1, 1.8-.2.4:1, 2.2-3.0:1, 3.0-4.3:1,
4.3-6.0:1, 5.5-8.5:1
High Contrast lenses: 1.25:1.45:1,
•
1.45-1.8:1, 1.8-2.4:1, 2.2-3.0:1, 3.0-4.3:1,
4.3-6.0:1, 5.5-8.5:1
Rigging frame
•
1.26X Anamorphic Lens
•
Anamorphic lens mount
•
ChristieTWIST™ Image Warping module
•
with enhanced edge-blending
Dual SD/HD-SDI (additional module),
•
DVI and legacy interface modules
Wired remote control
•
Remote IR sensor
•
Ethernet, RS-232 and RS-422 cables
•
Service manual
•
KoRE™ 10-bit librarian
•
Stacking offset extractor duct
•
Offering extreme brightness, high
contrast and installation and application
flexibility – the Christie Roadie 25K
shines virtually anywhere you put it.
New 10-bit image processing and standard Dual
SD/HD-SDI input module provide a broader color
spectrum, wider signal compatibility.
DIMENSIONS (W L H)
X X
Projection Head (approx): 25.6" x 49.0" x
•
20.5" (650mm x 1250mm x 520mm)
Ballast (approx): 21.3" x 17.3" x 20.9"
•
(540mm x 440mm x 530mm)
Optional rigging frame (approx):
•
33.5" x 54.9" x 25.7"
(851mm x 1395mm x 653mm)
REGULATORY APPROVALS
UL/CSA/IEC 60950 (3rd edition)
•
FCC Class A, CE, CCC (pending)
•
This product conforms to all relevant
•
European directives, standards, safety,
health and environmental concerns
WARRANTY
2 years parts and labor (including
•
light engine)
Corporate Offices
USA – CYPRESS
PH: 714-236-8610
FX: 714-503-3385
sales-us@christiedigital.com
CANADA – KITCHENER
PH: 519-744-8005
FX: 519-749-3136
sales-canada@christiedigital.com
Worldwide Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
sales-europe@christiedigital.com
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
sales-europe@christiedigital.com
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
sales-france@christiedigital.com
HUNGARY / EASTERN EUROPE
PH: +36 (0)1 47 48 100
FX: +36 (0)1 47 48 452
sales-eeurope@christiedigital.com
SOUTH AFRICA
PH: +27 (0) 317 671 347
FX: +27 (0) 317 671 347
sales-africa@christiedigital.com
SINGAPORE
PH: +65 6877 8737
FX: +65 6877 8747
sales-singapore@christiedigital.com
SHANGHAI
PH: +86 21 6278 7708
FX: +86 21 6270 5816
sales-china@christiedigital.com
BEIJING
PH: +86 10 6561 0240
FX: +86 10 6561 0546
sales-china@christiedigital.com
KOREA
PH: +82 2 702 1601
FX: +82 2 702 1602
sales-korea@christiedigital.com
JAPAN
PH: +81 3 3599 7481
FX: +81 3 3599 7482
sales-japan@christiedigital.com
WWW.CHRISTIEDIGITAL.COM