Christie M Series Specifications page 4

3 r E I n v E n t t H E
[ 1 ] Dual-lamp system
1, 2
High-efficiency, dual-lamp system:
200W or 350W (two lamp system)
•
120V (operation) for full brightness
•
At maximum brightness (9500 ANSI lumens)
•
the unit only draws 1320W
Stand by power consumption
•
(phantom power draw) is less than 20W
Lamps can be hot swapped while projector
•
is powered on and in use
Brightness 200W
Dual lamp max power 5100 ANSI lumens
(5560 center lumens)
min power 3825 ANSI lumens
(4210 center lumens)
Single lamp max power 2500 ANSI lumens
(2805 center lumens)
min power 1910 ANSI lumens
(2100 center lumens)
Flexible lumens levels at various lamp powers.
Lamp power is specific to each model and cannot be interchanged.
[ 2 ] Image quality
3-chip DLP ® technology, high-quality optics and world-class
10-bit image processing.
With low maintenance and highly reliable (>100,000 hours)
DLP ® technology, the Christie M Series delivers:
High brightness
•
Excellent color
•
Excellent uniformity
•
High contrast
•
Excellent fill ratio
•
S t A n D A r D S
3
350W
9500 ANSI lumens
(10,450 center lumens)
7125 ANSI lumens
(7840 center lumens)
4750 ANSI lumens
(5225 center lumens)
3560 ANSI lumens
(3920 center lumens)
[ 3 ] Intelligent Lens System (ILS)
typically found with DC encoded motors, providing accurate
and repeatable recall of all lens offset, zoom and focus positions.
5
2
4
6
TM
The ILS automatically
recognizes and calibrates
a lens when it is installed.
Stepper motor based
encoding ensures that motor
drift does not occur, as
8
9
7
[ 4 ] Expanded lens suite
With the addition of a
short zoom (1.25-1.6:1
SX+/1.16-1.49:1 HD)
and a long zoom (7.5-11.2:1
SX+/6.9-10.4:1 HD), this
expanded suite provides
the broadest range of HD lenses in this marketplace.
1