Table of Contents
Advertisement
Network Menu
SMTP Server
Network > Network Configuration > Notifications > SMTP Server
s
Enter the IP address for the projector's SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
Port Number
Network > Network Configuration > Notifications > Port Number
s
Enter a number for the SMTP server Port Number from 1 to 65535 (default is
25).
From
Network > Network Configuration > Notifications > From
s
Enter the e-mail address of the sender up to 64 alphanumeric characters long.
(Do not use " ( ) , : ; < > [ \] spaces.)
You can enter up to 32 alphanumeric characters long in the projector
menu. To enter more than 32 characters, use your Web browser.
a
Address 1 Setting/Address 2 Setting/Address 3
Setting
Network > Network Configuration > Notifications > Address 1 Setting
s
Network > Network Configuration > Notifications > Address 2 Setting
s
Network > Network Configuration > Notifications > Address 3 Setting
s
Enter the e-mail address to receive notifications up to 64 alphanumeric
characters long. (Do not use " ( ) , : ; < > [ \] spaces.) And select the alerts you
want to receive.
You can enter up to 32 alphanumeric characters long in the projector
menu. To enter more than 32 characters, use your Web browser.
a
SNMP
Network > Network Configuration > Notifications > SNMP
s
Set to On to monitor the projector using SNMP. To monitor the projector,
you need to install the SNMP manager program on your computer. SNMP
should be managed by a network administrator.
Trap IP Address 1/Trap IP Address 2
Network > Network Configuration > Notifications > Trap IP Address 1
s
Network > Network Configuration > Notifications > Trap IP Address 2
s
Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Community Name
Network > Network Configuration > Notifications > Community Name
s
Enter the SNMP community name up to 32 alphanumeric characters long.
(Do not use spaces and any symbols other than @.)
107
Advertisement
Table of Contents
