Functions; Full-Range Speaker (Rear); Subwoofer (Rear) - Yamaha DZR315-D Reference Manual

Functions

Full-range Speaker (Rear)

w e
Bottom
q
q Tiltable pole socket
This mount has two pole sockets. You can choose the
angle of the speaker so that it is positioned horizontal
to the floor or tilting down toward the floor by 7
degrees. Compatible with commercially available
speaker stands and speaker poles of 35 mm diameter.
(These sockets are not available on the DZR315(-D).)
Pole socket
7°
FRONT
7°
0°
w Screw holes for U-bracket
For installing with the separately sold U-brackets.
(These sockets are not available on the DZR315(-D).)
e Screw holes for eye bolts
For installing the speaker using eye bolts. The screw
holes for eye bolts go through the cabinet wall.

Subwoofer (Rear)

r
t
y
r Dual pole sockets
Compatible with commercially available speaker poles
of 35 mm diameter and M20 screw.
35 mm
diameter
When using a pole socket to install a speaker, observe
the following conditions for safety.
Subwoofer
DXS18XLF(-D)
DXS15XLF(-D)
t Feet cups
When stacking multiple speakers, align the rubber feet
of the upper speaker to the feet cups of the lower one.
y Wheel mounting screws
For installing the separately sold Yamaha SPW-1
wheels. If you are not using wheels, do not remove
these screws. Otherwise, the leakage of air will affect
sound quality.
NOTE
• For more information about installing wheels and related
precautions, refer to the corresponding manual for the
wheels.
• Do not install any item other than the SPW-1 wheels.
M20 screw
Length of
Speaker to be installed
the pole
Weight: 26 kg or less
Height: 76.0 cm or less 104 cm or less
(DZR15(-D) or smaller)
Weight: 22 kg or less
Height: 64.5 cm or less 82 cm or less
(DZR12(-D) or smaller)
Weight: 18 kg or less
Height: 53.7 cm or less 104 cm or less
(DZR10(-D) or smaller)
5