Protect; Hpf Screen Full Range; Lpf Screen Subwoofer; D-Contour Screen Full Range - Yamaha DZR315-D Reference Manual



PROTECT

Turns protected for a stored preset on/off.
Set this to ON to prevent presets from being overwritten (STORE), deleted (CLEAR) or
preset title changes (TITLE). A key mark
set title on the PRESET screen.
NOTE
Be aware that using RESTORE FROM USB (page
even if they are protected.
HPF Screen
Full range
Sets the HPF (high-pass filter) cutoff frequency.
Select OFF or set a specific frequency.
(page 13) will appear on the left side of the pre-
23, " DEVICE BACKUP" w) will overwrite presets
LPF Screen
Subwoofer
Sets the LPF (low-pass filter) cutoff frequency and the polarity.
q
w
q LPF
Select the LPF cutoff frequency.
w POLARITY
Select the polarity. When set to INVERTED, a Ø symbol will appear on the HOME
screen.
D-CONTOUR Screen
Full range
Switches a D-CONTOUR preset.
Set to the optimal frequency response characteristics according to the application.
• OFF (NORMAL): Turns D-CONTOUR off. This is a general-purpose frequency response
characteristic setting.
• FOH/MAIN: Boosts the high and low frequency components so that the frequency
response characteristic is suitable for main speaker use. The boost amount is automati-
cally adjusted to provide well-balanced, clear audio based on the volume.
• MONITOR: Reduces the low frequency range, which could otherwise tend to be boomy
if the speaker is set directly on the floor, providing vital clarity when using as a floor mon-
itor. This reduces latency and changes the phase characteristics.
Screen Functions
15