Stp Port Settings - Edimax GS-5208P User Manual

Field
STP Mode
Bridge Priority
Hello Time
Max Age
Forward Delay
After proper configuration, click Submit to apply the settings. In the mean time, you can view the STP bridge
status.

2.10.2 STP Port Settings

Choose Spanning Tree > STP Port Settings, and the following page appears.
RPC determines the path cost that is from per port to root bridge. It is related with speed. The following table lists
the recommended value. You can modify it during actual using.
Description
You can select it from the drop-down list:
The valid range is 0 ~ 61440. The lower integer value for
precedence indicates the higher priority. And the integer should
be a multiple of 4096.
The valid range is 1 ~ 10. The unit is second. The hello time
indicates the interval of transmitting BPDU.
The valid range is 6 ~ 40. The unit is second. It is the longest
waiting time of the blocking state turning into listening state.
Max Age >= 2*(Hello Time+1)
The valid range is 4 ~ 30. The unit is second. It is the longest
waiting time of the listening state turning into learning state or
the learning state turning into forwarding state.
2*(Forward Delay-1) >= Max Age
Field
Port No.
Priority
RPC
Description
Select it from the drop-down list.
The valid range is 0 ~ 240. It should be a
multiple of 16.
Root Path Cost. The valid range is 1 ~
200000000.
0 indicates Auto.