Download Print this page

MadgeTech Bridge101A-150 Product Information Card

Advertisement

Quick Links

Description
Range
Resolution
Accuracy
1,000,000 readings; software configurable memory wrap
Memory
330,000 readings in multiple start/stop
Wrap Around
Sample Rate
LED Indicator
µ
Units
V, mV,
V, Engineering Units specified through software
Reg. Interface
Baud rate
10 months typical at a 1 minute reading rate with a 350Ω load
Battery Life
2 years typical at a 1 minute reading rate with a 1000Ω load
Operating
-40ºC to +80ºC (-40ºF to +176ºF),
Environment
0%RH to 90%RH non-condensing
Material
Dimensions
1.4" x 2.5" x 0.6" (36mm x 64mm x 16mm)
Weight
Approvals
*Bridge101A Range, Resolution and Accuracy
Nominal Range
±30 mV
Measurement Range
±30 mV
Resolution
1 µV
±0.01% FSR;
Calibrated Accuracy
±3 Microvolts
Input Range
0 to 2.5V
Reference Voltage
2.5 V
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT,
CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE, CRUSH, PENETRATE OR INCINERATE.
BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 80°C (176°F).
Specifications subject to change.
1.800.544.2843
Bridge101A
See Table Below*
Yes
4Hz to 1 every 24 hours
Red and Green
IFC200
115,200
ABS plastic
0.8 oz (24 g)
CE
±150 mV
±1000 mV
±160 mV
±1200 mV
5 µV
50 µV
±0.01% FSR;
±0.01% FSR;
±16 Microvolts
±120 Microvolts
0 to 2.5 V
0 to 2.5 V
2.5 V
2.5 V
REV 13 2014.01.02
www.calcert.com
10
15
20
5
25
0
30
Product Information Card
Bridge101A-30
30mV Bridge Data Logger
Bridge101A-150
150mV Bridge Data Logger
Bridge101A-1000
1000mV Bridge Data Logger
sales@calcert.com
Bridge101A

Advertisement

loading

Summary of Contents for MadgeTech Bridge101A-150

  • Page 1 1 µV 5 µV 50 µV 30mV Bridge Data Logger ±0.01% FSR; ±0.01% FSR; ±0.01% FSR; Calibrated Accuracy Bridge101A-150 ±3 Microvolts ±16 Microvolts ±120 Microvolts 150mV Bridge Data Logger Input Range 0 to 2.5V 0 to 2.5 V 0 to 2.5 V...
  • Page 2 Bridge101A Product Quick Reference Card Product Notes - Downloading will offload and save all the recorded data to the PC. The Bridge101A data logger is designed to interface with and measure strain gauges and load Device Maintenance cells. The device provides an excitation voltage of 2.5V’s and is available in the following millivolt input ranges: ±30mV, ±150mV, ±1000mV.

This manual is also suitable for:

Bridge101a-30Bridge101aBridge101a-1000