D-Link DCS-4802E User Manual page 31

Section 3: Configuration
Enable UPnP Presentation: Enabling this setting allows your camera to be configured
as a UPnP device on your network.
Enable UPnP Port Forwarding: Enabling this setting allows the camera to add port
forwarding entries into the router automatically on a
UPnP capable network.
Enable PPPoE: Enable this setting if your network uses PPPoE.
User Name / Password: Enter the username and password for your PPPoE
account. Re-enter your password in the Confirm
Password field. You may obtain this information from
your ISP.
HTTP Port: The default port number is 80.
Access Name for Stream 1~2: The default name is video#.mjpg, where # is the number
of the stream.
HTTPS Port: You may use a PC with a secure browser to connect to
the HTTPS port of the camera. The default port number
is 443.
Authentication: Choose to enable or disable RTSP digest encryption.
Digest encryption uses MD5 hashes.
RTSP Port: The port number that you use for RTSP streaming to
mobile devices, such as mobile phones or PDAs. The
default port number is 554. You may specify the address
of a particular stream. For instance, live1.sdp can be
accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x
represents the IP address of your camera.
Enable CoS: Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
reservations.
D-Link DCS-4802E User Manual 31