A.2.3 Selecting Remcs Center - Fujitsu PRIMEHPC FX1000 User Manual

Appendix A REMCS
A.2 REMCS Detail Setup
Table A.6 Information Specified on the [Environment settings] Screen (continued)
Input Item
Split size
*1 Valid only when [AUTH SMTP] is selected in [Authentication type]
*2 Required when anything other than [No Certification] is selected in [Authentication type]
*3 Required when [POP Before SMTP] is selected in [Authentication type]
*4 The selectable encryption types change as follows according to the large data transmission method:
- No split: Both formats selectable
- Split large data into multiple E-mails: Conventional format only
- Split event: Both formats selectable
*5 Required when [No split] is selected in [Large data transmission method]
A.2.3 Selecting REMCS Center
Select [Selecting REMCS Center] from the [FE operation] menu to display the [Selecting REMCS Center]
screen shown in
Select from [REMCS Center] on the [Selecting REMCS Center] screen.
Input Required?
Conditional(*5) Specify the division size with up to 3 single-byte digits.
Figure A.14.
- If [Split large data into multiple E-mails] is selected in [Large
data transmission method], specify a value between 10 and
100 KB. The default is 64 KB.
- If [Split event] is selected in [Large data transmission
method], specify a value between 64 and 512 KB. The
default is 512 KB.
75
Description
C120-0091-02EN