Table of Contents
Advertisement
Appendix A REMCS
A.1 REMCS Settings
Table A.2 Information Specified on the [Internet(Mail Only) connection environment settings] Screen
Input Item
Password
POP Server
Large data transmission
method(*4)
Split size
Encryption type(*4)
*1 Valid only when [AUTH SMTP] is selected in [Authentication type]
*2 Required when anything other than [No Certification] is selected in [Authentication type]
*3 Required when [POP Before SMTP] is selected in [Authentication type]
*4 The selectable encryption types change as follows according to the large data transmission method:
- No split: Both formats selectable
- Split large data into multiple E-mails: Conventional format only
- Split event: Both formats selectable
*5 Required when [No split] is selected in [Large data transmission method]
6.
Click the [Next] button.
The [Periodical Connection settings] screen appears.
(continued)
Input Required?
Conditional(*2) Specify the password for the authentication server with up to
64 single-byte alphanumeric characters. "*" (asterisk) is
displayed for every specified character.
Conditional(*3) Specify the POP server name or IP address with up to 128
single-byte alphanumeric characters.
-
Select a large data transmission method from the following:
- No split
- Split large data into multiple E-mails
- Split event (Default)
Conditional(*5) Specify the division size with up to 3 single-byte digits.
- If [Split large data into multiple E-mails] is selected in [Large
data transmission method], specify a value between 10 and
100 KB. The default is 64 KB.
- If [Split event] is selected in [Large data transmission
method], specify a value between 64 and 512 KB. The
default is 512 KB.
-
Select an encryption type from the following:
- S/MIME format (Default)
- Conventional format
Conventionally, encryption is performed during REMCS file
format creation. Instead, REMCS supports the generally used
S/MIME encrypted e-mail method.
63
Description
C120-0091-02EN
Advertisement
Table of Contents
