Table of Contents
Advertisement
Chapter 3 Web GUI Functions
3.3 Power Control
Operation Item
Apply
Changing the Power Supply Status of Nodes
1.
Under [Power Control] and [Boot Script Number], specify power control and a boot mode, respectively,
for each node.
Input Item
Power On All
Power Control
Boot Script Number
2.
Click the [Apply] button.
A confirmation dialog box appears.
3.
Click the [OK] button.
The power supply status of nodes is changed, and the browser returns to the [Power Control] screen.
The [Power Control] screen displays the following items.
Table 3.10 Operation Item on the [Power Control] Screen
Change the power supply status of nodes. For the procedure, see
the Power Supply Status of
Table 3.11 Specifying Power Control and a Boot Mode
If the [Power On All] check box is checked, [Power On] is specified for
powered-off nodes under [Power Control].
If the checked [Power On All] check box is unchecked, [Power Control] for the
powered-off nodes returns to [(Not specified)].
Specify power control for each node.
If the node has been powered off
- Power On: Issues a power-on instruction.
- (Not specified): Does nothing.
If the node has been powered on
- Stop: Stops the node.
- Reset: Restarts the OS on the node.
- Dump Request: Issues an instruction to collect an OS dump.
- OS Shutdown: Stops the OS on the node.
- (Not specified): Does nothing.
Specify a boot mode for each node.
- 00h: Boot node default
- 01h: Not supported
- 02h: Used for OS installation
- Force boot into EFI Boot Manager: Stop at UEFI without boot
- Auto select Boot Script Number: Boot script selected according to the node
type
Description
Nodes."
Description
24
"Changing
C120-0091-02EN
Advertisement
Table of Contents
