Table of Contents
Advertisement
Chapter 3 Web GUI Functions
3.4 Configuration
Input Item
Engine ID
Remarks
- To disable existing SNMP Trap setting information, delete its IP address.
3.
Click the [Apply] button.
A confirmation dialog box appears.
Remarks
- To restore the currently set SNMP trap setting information, click the [Reset] button instead of the
[Apply] button.
4.
Click the [OK] button.
The SNMP Trap setting information is changed, and the browser returns to the [SNMP Trap Settings]
screen.
Sending a Test Trap
1.
Click the [Test Trap] button.
Table 3.28 Specifying SNMP Trap Setting Information (continued)
Specify a hexadecimal number with up to 32 digits and "0x" at the beginning. In
other words, in accordance with SNMPv3 specifications, specify "0x" +
"enterprise number with leading 1 bit" (8 hexadecimal digits) + "format value" +
"unique value" (up to 20 hexadecimal digits).
Enterprise number
This refers to a private enterprise number of the Internet Assigned Numbers
Authority (IANA). For example, if the enterprise number is 211 (0x000000d3 in
hexadecimal), specify "0x800000d3" (with a leading 1 bit).
Format value
Specify "03" or "05".
Unique value
The unique value varies depending on the format value.
- For "03": Specify the MAC address. We recommend using the MAC address
(12 digits excluding the colon (:)) of the BMC control LAN port. You can check
the MAC address from the BMC webpage at [Configuration] - [Network Settings].
- For "05": Specify an arbitrary unique value with a hexadecimal number of up
to 20 digits.
- Do not set any alphabetic letter that is not a hexadecimal digit.
An example of input is shown below.
- When specifying the MAC address 1A:2B:3C:4D:5E:6F (for example), enter
"0x800000d3031a2b3c4d5e6f".
- When specifying the arbitrary value 0xffeeddccba9876543210 (for example),
enter "0x800000d305ffeeddccba9876543210".
Description
38
C120-0091-02EN
Advertisement
Table of Contents
