Control Panel - Westinghouse WDF902 User Manual

Control panel

1 On/off button (POWER)
2 Program selection button (PROGRAM)
3 Delay start button (DELAY)
4 Start and Button lock button (START)
5 Start indicator light
6 Indicator lights
7 Digital display
8 Program indicator lights
Button LOCK
Rinse Aid
Digital display
The display shows:
• program duration,
• remaining time to the end of the program,
• end of a washing program,
• number of hours in delay start,
• fault codes,
• Button Lock function. The digital display
shows CL when this function is active.
Delay start button
Use the delay start button to delay the start
of the washing program with an interval be-
tween 1 and 19 hours. Refer to 'Select and
start a washing program'.
Button lock
The button lock function locks all buttons on
the control panel while the washing program
is in operation.
Follow these steps to set the Button lock
function:
1. Switch on the appliance.
Indicator lights
The indicator light comes on when the button lock function
is active.
The indicator light comes on when it is necessary to fill the
rinse aid container. Refer to 'Use of rinse aid'.
The indicator light is off while a washing program operates.
2. Set a washing program.
3. If necessary, set the delay start. Refer to
'Select and start a washing program'.
4. Press the Start button to start the wash-
ing program or the delay start.
5. To activate the button lock function,
press the Start button for approximately
5 seconds, or until the Button lock indi-
cator light flashes.
6. Button lock indicator light flashes for ap-
proximately 15 seconds.
7. When the Button lock function is active
the indicator light is on with a static light.
If you press a button while Button Lock func-
tion is on, an audible signal indicates that
buttons are locked.
At the end of a washing program the Button
lock function is deactivated by opening and
closing the door or switching off the appli-
ance.
westinghouse 5