Vivotek IB9367-EHT-v2 User Manual page 433

© 2020 VIVOTEK INC. All Right Reserved
ERROR: The device does not exist or is busy
ERROR: Formatted successfully, but cannot create database
8.39
Methods
8.39.1 Get Stream URI
Note: This request requires Viewer access privileges.
Syntax:
For RTSP, the user needs to input the URL below into a RTSP compatible player.
rtsp://<servername>:<port>/media2/stream.sdp?profile=<streamprofile_i<0~(n-1)>_token>[&<par
ameter>=<value>]
"n" is the maximum stream profile number (capability_media_streamprofiles_num)

"streamprofile_i<x>_token" is the unique identifier for each profile, x is within

0~(capability_media_streamprofiles_num)-1.
port is the rtsp port.

Please refer to the streamprofile group for requesting the stream profile token value for each
profile.
PARAMETER VALUE
pimssm 1
Example:
Request the streaming of streamprofile_i0_token=profile200,
rtsp://192.168.1.1:554/media2/stream.sdp?profile=profile200
Note:
If the requested certain profile streamprofile_i<x>_occupied=0, which indicates stream profile <x>
has not been created, the above method for requesting RTSP streaming will fail.
SDP for always multicast
8.39.2 Get
(capability_media_streamprofiles_support = 1)
for Accessing Streaming
(capability_media_streamprofiles_support = 1)
DESCRIPTION
1: Enable the feature of Protocol
Independent Multicast - Source
Specific Multicast.
* This field is only required when
using PIM-SSM feature.
* Only valid when
network_rtsp_pimssm_enable=1.
VIVOTEK
294
User's Manual - 433