Table of Contents
Advertisement
VIVOTEK
© 2020 VIVOTEK INC. All Right Reserved
NAME
disablemdonptz
7.40 Camera PTZ Control (IZ Series)
Group: camctrl_c<0~(n-1)> for n channel products
capability_camctrl_c0_buildinpt = 0)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
focusmode
368 - User's Manual
VALUE
SECURITY
(get/set)
<boolean>
1/4
(capability_camctrl_c0_zoommodule = 1 and
VALUE
SECURITY
(get/set)
string[16]
6/7
string[16]
6/7
0 ~ 255
1/4
-5 ~ 5
1/4
-5 ~ 5
1/4
-5 ~ 5
1/4
-5 ~ 5
1/4
-5 ~ 5
1/4
auto,onetimeau
1/4
to,spotlight,ma
DESCRIPTION
driver.
2: enable PTZ commands with UART
tunnel.
* only available when
capability_camctrl_c0_rs485=2
Disable motion detection on PTZ
operation.
DESCRIPTION
(Internal used, read only)
(Internal used, read only)
Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have to
be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
Pan speed
Tilt speed
Zoom speed
Auto pan speed
Auto focus speed
Indicate the focus control mode.
229
Advertisement
Table of Contents
