Table of Contents
Advertisement
© 2020 VIVOTEK INC. All Right Reserved
NAME
idleaction_interval
P
PTZ C
LEASE REFER TO
ONTROL
7.41 Camera PTZ Control (SD Series)
Group: camctrl_c<0~(n-1)> for n channel products
bit4 of capability_ptzenabled is 1)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
ccdtype
motortype
cameraid
panspeed
tiltspeed
zoomspeed
autospeed
focusspeed
focusmode
VALUE
SECURITY
(get/set)
1~999
1/4
API
(the bit7 of capability_ptzenabled is 0 and the
VALUE
string[16]
string[16]
1 ~ 255
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
-5 ~ 5
auto,onetimeauto,sp
otlight,manual
DESCRIPTION
should be taken while idle.
While idle over this time interval, idle
action will be taken.
SECURITY
DESCRIPTION
(get/set)
6/7
(Internal used, read only)
6/7
(Internal used, read only)
1/4
Camera ID controlling external
PTZ camera.
Note:
Please set your speed dome to
the appropriate baud rate, and
Camera ID, e.g. 2400bps, camera
ID 1,2,3,,,,etc.
All Camera IDs on the same
controlling system (NVR or rs485
keyboard) have to be distinct.
Therefore, once you send a
controlling signal, each camera
will only accept the inputs with
the corresponding ID.
1/4
Pan speed
1/4
Tilt speed
1/4
Zoom speed
1/4
Auto pan speed
1/4
Auto focus speed
1/4
Indicate the focus control mode.
VIVOTEK
232
User's Manual - 371
Advertisement
Table of Contents
