Table of Contents
Advertisement
VIVOTEK
SIP
SIP is short for Session Initiation Protocol. If necessary, you can change the default port number,
5060, to one between 1025 and 65535.
Two way audio port: By default, the two way audio port is set to 5060. Also, it can also be assigned
to another port number between 1025 and 65535.
The Network Camera supports two way audio communication so that operators can transmit and
receive audio simultaneously. By using the Network Camera's built-in or external microphone and
an external speaker, you can communicate with people around the Network Camera.
Note that as JPEG only transmits a series of JPEG images to the client, to enable the two-way
audio function, make sure the video mode is set to H.264 on the Media > Video > Stream settings
page and the media option is set to "Media > Video > Stream settings" on the Client Settings page.
Please refer to Client Settings on page 43 and Stream settings on page 78.
Audio transmitted to operators
America
Taiwan
Audio transmitted from operators
User's Manual - 101
Advertisement
Table of Contents
