Safety Decal Care; Before Operation - Tar River SAYA-507 Operator's Manual

Review the safety instructions with all users annually.
This equipment is dangerous to children and persons unfamiliar with its operation. The operator
should be a responsible adult familiar with farm machinery and trained in this equipment's operations.
Do not allow persons to operate or assemble this unit until they have read this manual
and have developed a thorough understanding of the safety precautions and of how it
works.
To prevent injury or death, use a tractor equipped with a Roll Over Protective System (ROPS). Do not
paint over, remove or deface any safety signs or warning decals on your equipment. Observe all safety
signs and practice the instructions on them.
Never exceed the limits of a piece of machinery. If its ability to do a job, or to do so safely, is in question
- DON'T TRY IT.
•
Keep safety signs clean and legible at all times.
•
Replace safety signs that are missing or have become illegible.
•
Replaced parts that displayed a safety sign should also display the current sign.
•
Safety signs are available from your Distributor or Dealer Parts Department or the factory.
How to Install Safety Signs:
•
Be sure that the installation area is clean and dry.
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Align the decal over the specified area and carefully press the small portion with the exposed sticky
backing in place.
•
Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in
place.
•
Small air pockets can be pierced with a pin and smoothed out using the piece of decal backing pa-
per.

BEFORE OPERATION

•
Carefully study and understand this manual.
•
Do not wear loose-fitting clothing, which may catch in moving parts.
•
Always wear protective clothing and substantial shoes.
•
Assure that all tires are inflated evenly.
•
Give the unit a visual inspection for any loose bolts, worn parts or cracked welds, and make neces-
sary repairs. Follow the maintenance safety instructions included in this manual.
•
Be sure that there are no tools lying on or in the equipment.
•
Do not use the unit until you are sure that the area is clear, especially of children and animals.

SAFETY DECAL CARE

5