Seeding/Fertilizing Rate Adjustment Handle - Tar River SAYA-507 Operator's Manual

SEEDING/FERTILIZING RATE ADJUSTMENT HANDLE

To adjust the fertilizer rate, you will need to adjust hand wheels (on each side of hopper). The
seed/fertilize rate depends on the seed/fertilizer you want to plant, please refer to your seed/
fer-
Before adjusting the seed rate, return the rate on the Scale to zero by rotating the hand wheel,
then check and make sure all seeding/fertilizing wheels are fully closed on all seeding/
fertilizing boxes. (SEE BEFORE BEGINNING section) If not, you need to loosen the clips
on both sides of the seeding/fertilizing wheel and push the wheel into the box. Tighten the
clips. When the seeding/fertilizing box is closed and the meter indicates "0". Adjust fertilizing
rate by rotating the hand wheel. The meter has 8 numbers from 0-8, from zero to
Maximum.
Important
Tighten locking nut on handle assembly before running
Weight, size, relative humidity, and moisture content can affect seeding rates.
Users can adjust the position of the seed/fertilizer TONGUE and lock in different positions by
moving the cotter pin to meet the different seeding/fertilizing size..
The smaller the seed, the higher up the TONGUE should be
positioned. For larger seed , the TONGUE should be opened
more.
tilizer supplier's chart to get the proper seed/fertilize rate.
Positioning Holes
Tongue and positioning Holes
LOCKING NUT
12