Connection And Configuration - D-Link DIR-X1530 Quick Installation Manual

CONNECTION AND CONFIGURATION

1. Connect the power cord to the power connector port on the back panel of the
router, then plug the power adapter into an electrical outlet or power strip.
2. Connect the router to your PC.
• PC with Ethernet adapter: connect an Ethernet cable between an available
LAN port of the router and the Ethernet port of your PC. Make sure that the
Ethernet adapter of your PC is configured to obtain an IP address
automatically.
• PC with Wi-Fi adapter: make sure that the Wi-Fi adapter of your PC is on
and configured to obtain an IP address automatically. Connect to the network
DIR-X1530
DIR-X1530-5G (for operating in the 5GHz band). Use WPS PIN from the
barcode label as the network key.
3. Start a web browser. In the address bar of the web browser, enter the IP address
of the router (by default, 192.168.0.1). Press the Enter key.
After the first access to the web-based interface you are forwarded to the start page of
the Initial Configuration Wizard.
Click the START button.
4.
5. Select a language for the router's web-based interface.
Click the CONTINUE button in order to configure the device with the Initial
6.
Configuration Wizard or the ADVANCED SETTINGS button to configure all
needed setting manually.
When the web-based interface is accessed the next time and after, the login page
opens. Enter the username (admin) in the Username field and the password you
specified in the Password field, then click the LOGIN button.
For detailed description of every page of the web-based interface, see the
"User Manual" document on D-Link website (see www.dlink.ru).
(for operating in the 2.4GHz band) or