Advertisement
CONNECTION AND CONFIGURATION
1. Connect the power cord to the power connector port on the back panel of the
router, then plug the power adapter into an electrical outlet or power s trip.
2. Connect the router to your PC.
•
PC with Ethernet adapter: Connect an Ethernet cable between an available
Ethernet port of the router and the Ethernet port of your PC. Turn on the router by
pressing the POWER button on its back panel. Make sure that the Ethernet
adapter of your PC is configured to obtain an IP address automatically.
•
PC with Wi-Fi adapter: Turn on the router by pressing the POWER button on its
back panel. Make sure that the Wi-Fi adapter of your PC is on and configured to
obtain an IP address automatically. Connect to the network
(for operating in the 2.4GHz band) or dlink-825M-5G-xxxx (for operating in the
5GHz band). Use wireless password from the device label.
3. Start a web browser. In the address bar of the web browser, enter the
IPaddress of the router (by default, 192.168.0.1). Press the Enter key.
After the firs t access to the web-based interface you are forwarded to the s tart
page of the Setup Wizard.
4. Click the Next button.
5. Select a Mode (Router, Bridge/AP or WISP)
6. Click the Next button in order to configure the device with the Setup
Wizard or the Cancel button to configure all needed setting manually.
When the web-based interface is accessed the next time and after, the login page
opens. Enter the username (admin) in the Username field and the password you
specified in the Password field, then click the LOGIN button.
Use the menu in the top part of the page to configure the router.
To exit the web-based interface, select the Logout menu section.
dlink-825M-2.4G-xxxx
Advertisement
