Step 1; Step 2 - modway EEI-3907 Manual

EEI-3907 CHAIR

STEP 1:

1. Remove the hardware bag from the Chair Base (2) package.
2. Please put Chair Body (1) upside down on a carpeted or padded surface.
3. Attach Chair Base (2) to Chair Body (1) by using 4 pieces of Bolts (A) with 4 pieces of Spring Washers (B)
and 4 pieces of Flat Washers (C) as shown.
(Note: please match the holes on Chair Base (2) and Chair Body (1) carefully.)
4. Use Allen Wrench (D) to tighten all Bolts (A) clockwise until secure.

STEP 2:

Carefully turn over the assembled chair.
Customer Service 609-256-9000︱www.modway.com
Assembly is complete. Your Chair is ready to enjoy now!
Page 2 of 2