Table of Contents
Advertisement
1. Your wine cooler is equipped with an AUTOMATIC control panel lock function. This function will
prevent any unwanted changes to your temperature or power settings.
2. The lock function will activate automatically 12 seconds after the last time a button is pushed on the
control panel.
3. To unlock the control panel, press and hold the down arrow button and up arrow button for three
seconds, then the control panel will beep and blink, indicating the control panel is active and the
settings can be changed.
Important: In order to operate efficiently, this product should be in an environment with an ambient
temperature of less than 90°F.
•
Always unplug the wine cellar before cleaning.
•
Do not use benzene, scrubbing brushes or chemical cleaners as these will damage the unit.
•
Use only a mild, nonabrasive cleanser to clean the exterior of the cabinet.
•
Clean the stainless steel door and handle by wiping with a warm water and baking soda solution. The
solution should be about 2 tablespoons of baking soda to a quart of water.
•
Wash the racks with a mild detergent solution.
•
Always dry all parts with a clean dry cloth before plugging the wine cellar back into the receptacle.
MOVING YOUR WINE CELLAR
•
Always unplug the wine cellar before moving.
•
Always remove all bottles before moving the wine cellar.
•
Securely tape down all loose items (shelves) inside your appliance.
•
Tape the door shut.
•
Be careful of cabinet legs to avoid damage when moving.
•
Be sure the wine cellar stays in the upright position during transportation.
•
Protect the outside of appliance with a blanket or similar item when moving as needed.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
CONTROL PANEL LOCK
CLEANING AND CARE
i n f o @ v i n o t e m p . c o m
9
Advertisement
Table of Contents
