At some point in time, you may desire to reset the transceiver
settings to their default values. This function will reset all channels to
their default frequencies and QT/DQT, the VOX function to its default
status, and all keys to their default functions.
To reset the transceiver:
1 With the transceiver power OFF, press and hold the PTT switch,
the Up key, and the Down key while turning the transceiver
power ON.
•
Continue to hold the keys for 2 seconds, until the LED indicator
lights yellow.
2 Release the keys.
•
The transceiver announces "Confirm" and returns to normal
operation.
•
If the keys are released before the LED indicator lights yellow, All
Reset mode will cancel.
Note: All Reset Mode cannot be entered if Super Lock is activated.
32
aLL RESET MoDE