Basic Operations - Kenwood ProTalk LT PKT-23LF Instruction Manual

PowER anD VoLuME
1 Hold the Power switch for approximately 1 second to switch the
transceiver power ON.
• A beep sounds and the LED indicator blinks blue a number of
times as described in the "BATTERY LEVEL GUIDE" table on
page 20.
To turn the power OFF, hold the Power switch for 2 seconds.
•
2 In Volume Adjustment mode, press the Up/Down keys to adjust
the volume.
Press the key programmed as [Squelch Off] to hear background
•
noise.
Press the PF-2 key to switch between Volume Adjustment mode
•
and Channel Select mode.
TRanSMITTInG anD RECEIVInG
1 In Channel Select mode, press the Up/Down keys to select your
desired channel.
• After selecting a channel, the channel number is announced and
the LED indicator blinks to indicate the current channel number.
For example, to indicate the channel number 5, the LED blinks
blue once and a voice announces "Five".
Channel
Number
1
2
3
4
5
6
7
8
9
10
11
12
18

BaSIC oPERaTIonS

LED Voice Announcement
Yellow
Blue
Green
"One"
"Two"
"Three"
"Four"
"Five"
"Six"
"Seven"
"Eight"
"Nine"
"Ten"
"Eleven"
"Twelve"
Number of times LED
blinks
1
2
3
4
1
2
3
4
1
2
3
4