Kenwood ProTalk LT PKT-23LF Instruction Manual page 23

3 Press the Up/Down key to select your desired channel, then
press the PTT switch to confirm the selected channel.
• Upon releasing the PTT switch, a beep will sound and the
transceiver announces "Table Zero".
4 Press the Up/Down key to increment/ decrement the Table
number, to select the new channel frequency.
Press and hold the Up/Down key to continuously increment/
•
decrement the number.
• Table numbers and their corresponding operating frequencies are
provided in the tables on page 24.
• A voice announcement will inform you of the selected Table number.
5 Press the PTT switch to save the setting and switch to the QT/
DQT setting.
• A beep will sound and the transceiver announces "QT".
6 Press the Up/Down key to select QT or DQT, then press the PTT
switch to confirm the selection.
7 Press the Up/Down key to increment/ decrement the QT/ DQT
number, to select the new value.
Press and hold the Up/Down key to continuously increment/
•
decrement the QT/ DQT number.
• QT/ DQT numbers and their corresponding settings are provided
in the tables on pages 25 to 27.
• A voice announcement will inform you of the selected QT/ DQT
number.
8 Press the PTT switch to save the setting.
• A beep will sound and the transceiver announces "Channel
Number".
• Repeat steps 3 to 8 to set up another channel.
9 Press and hold the PF-2 key and PTT switch to store the settings
and return to normal operation.
Note: The transceiver will automatically return to normal operation if
no action is performed for 20 seconds.
23