At some point in time, you may desire to reset the transceiver
settings to their default values. This function will reset all
channels to their default frequencies and Common ID (Digital)/
QT/DQT (Analog), the VOX function to its default status, and all
keys to their default functions.
To reset the transceiver:
1 With the transceiver power OFF, press and hold the PTT
switch, the Side 1 key, and the Side 2 key while turning the
transceiver power ON.
•
Continue to hold the keys for 2 seconds, until the LED lights
orange.
2 Release the keys.
•
The transceiver beep sounds and returns to normal operation.
•
If the keys are released before the LED lights orange, All Reset
Mode will cancel.
26
ALL RESET MODE