At some point in time, you may desire to reset the transceiver
settings to their default values. This function will reset all
channels to their default frequencies and QT/DQT, the VOX
function to its default status, and all keys to their default
functions.
To reset the transceiver:
1 With the transceiver power OFF, press and hold the PTT
switch, the Up key, and the Down key while turning the
transceiver power ON.
•
Continue to hold the keys for 2 seconds, until the LED indicator
lights yellow.
2 Release the keys.
•
The transceiver announces "Confi rm" and returns to normal
operation.
•
If the keys are released before the LED indicator lights yellow,
All Reset mode will cancel.
Note: This mode is effective when Voice Announcement is set in
English.
22
ALL RESET MODE