Making Calls; Basic Calling; Calling By Dialing - Panasonic KX-TPA73 Operating Instructions Manual

3.1 Making Calls

3.1 Making Calls
• To enter characters, see 2.11 Entering Characters, page 55.
• You can confirm that the number was dialed correctly before calling (Predialing) by
entering the number, then press
• To clear an entire number while predialing, press
• To cancel dialing, press
• If flashes, move closer to the base unit and dial again.
• The "+" symbol (international dialing code) can be entered by pressing and holding the
"0" key.
• To insert "P" symbol (3 second pause) between phone numbers, press
It is useful when you want to operate voice mail service without listening to pre-
recorded announcement, for example. Repeat as needed to create longer pauses.
This soft key is displayed only when configured on the telephone. Contact your
*1
administrator for further information.

3.2 Basic Calling

3.2.1 Calling by Dialing

1.
2. Dial the outside party's number.
3. Press
4. : End the call
Note
To dial a new number without going on-hook, follow the procedure below.
1. /
2. [ ]/[ ]: "Flash/Recall"
3. /[CENTER]
Predialing
[In standby mode]
1. Dial the number while on-hook.
2. After dialing, press
60
.
/ /[CENTER], or wait the inter digit timer to timeout.
: End the call
.
.
for more than 2 second.
.
*1