Editing A Stored Item In The Local Contacts - Panasonic KX-TPA73 Operating Instructions Manual

Note
• Steps 7 and 8 can be omitted if you do not want to assign a category.
• Steps 9 and 10 can be omitted if you do not want to assign a default number. (The
first number entered for an entry will automatically be assigned as the default
number.)
• The valid digits are "0" through "9", " ", " ", " ", "P".
To enter " " or "P", see 3 Making Calls, page 59.
• If an item with the same name and number exists, the new information added will be
merged with the existing item.
• To enter characters, see 2.11 Entering Characters, page 55.

7.2.3 Editing a Stored Item in the Local Contacts

Editing a Stored Item
[In standby mode]
1. /[ ]
2. [ ]/[ ]: "Local"/"Local Phonebook"
3. Enter the name or the first character(s) of the desired name.
4. [ ]/[ ]: Select the desired item.
5.
6. [ ]/[ ]: Select the desired name, phone number, category or default telephone
number.
7. Edit the data as necessary.
8. Repeat step 6 to 7 and edit the items you want to change.
9.
If only Local Contacts is permitted, this step is skipped.
*1
Note
• To change a character or digit.
1. Press [ ] or [ ] to highlight a character or digit.
2. : Delete the character or digit.
3. Enter the new character or digit.
• To clear an entire line, press and hold
• To move the cursor to the left or right, press [ ] or [ ], respectively.
7.2.3 Editing a Stored Item in the Local Contacts
/[CENTER]
[CENTER]/[ ]
for more than 1 second.
*1
89