Holding A Call - Panasonic KX-TPA73 Operating Instructions Manual

5.1.2 Holding a Call

You can put a call on hold by holding the call at your extension.
Holding
To hold the current call
1.
Note
• If you select a LINE key other than the one for the current call, the call is put on hold
or is disconnected depending on the Automatic Call Hold settings. For details,
contact your phone system dealer/service provider.
To retrieve a call on hold
1.
To retrieve a call on hold at your line (when connected to the Panasonic base unit
only)
1. /
2. Press the dial key corresponding to the slowly flashing green LINE indicator, or
press [ ] or [ ] to select a slowly flashing green LINE indicator.
3. /[CENTER]/
Holding in a System Parking Zone (Call Park)
You can use this feature as a transferring feature.
When Call Park is permitted, the "Call Park" item is available in the Function Key list.
However, the Call Park feature number must be set beforehand. Also, depending on your
phone system, you may need to enter a parking zone number to retrieve a parked call.
The feature depends on your phone system. Contact your administrator for further
information.
To set
1. /
or press the soft key assigned as "
To retrieve (Call Park Retrieve)
[In standby mode]
1. Enter the Call Park Retrieve feature number.
2.
("Call Park")
PARK
".
5.1.2 Holding a Call
75