Using The Base Unit Contacts (When Connected To A Base Unit Other Than The Panasonic Base Unit Only); Storing An Item In The Base Unit Contacts - Panasonic KX-TPA73 Operating Instructions Manual

7.3 Using the Base Unit Contacts (when connected to a base unit other than the
Panasonic base unit only)
7.3 Using the Base Unit Contacts (when connected to a base
unit other than the Panasonic base unit only)

7.3.1 Storing an Item in the Base Unit Contacts

Storing a New Item
[In standby mode]
1. /[ ]
2. [ ]/[ ]: "Base PBK"
3.
4. [ ]/[ ]: "New Contact"
5. [ ]/[ ]: "Enter Name"
6. Enter a name (max. 24 characters).
7. [ ]/[ ]: Select a phone number type (1 to 2
8. Enter the phone number (max. 32 digits).
9. Repeat steps 7 and 8 to add additional phone number types.
10. [ ]/[ ]: "Ring Pattern"
11. [ ]/[ ]: Select the desired ring pattern.
12. [ ]/[ ]: "Line"
13. [ ]/[ ]: Select the desired line.
14.
15. [ ]/[ ]: "Back to home screen"
If the contacts cannot be registered, "Unavailable" is displayed.
*1
You can register up to 2 phone numbers per item.
*2
Note
• The valid digits are "0" through "9", " ", " ", " ".
To enter " ", see 3 Making Calls, page 59.
• If an item with the same name and number exists, the new information added will be
merged with the existing item.
• To enter characters, see 2.11 Entering Characters, page 55.
94
/[CENTER]
*1
/[CENTER]
/[CENTER]
/[CENTER]
/[CENTER]
/[CENTER]
).
*2
/[CENTER]
/[CENTER]