Panasonic KX-TPA73 Operating Instructions Manual page 145

10.1.5 System Setting Menu Layout (when connected to the Panasonic base unit)
Sub Item
Date & Time *7
Time Zone
Restart (Base)
*8
After selecting the line, selects the handset(s) assigned to the line.
*1
After selecting the handset, selects the line(s) assigned to the handset.
*2
After selecting the handset, selects the default line assigned to the handset.
*3
Max. 128 characters.
*4
This item is displayed only during initial setup.
*5
If the Xsi service is available, you can select these items. Contact your
*6
administrator for further information.
Availability depends on your phone system. Contact your administrator for further
*7
information.
The base unit will restart if all connected units are in standby mode.
*8
"n" means maximum line number of Panasonic base unit.
*9
If the UC service is available, you can select these items. Contact your
*10
administrator for further information.
Network Settings
The administrator password may be required for this setting. Contact your administrator
for further information. For available characters, see 10.1.2 Character Table for
Administrator Password, page 124
Sub Item
IP Mode Select
Description
Specifies the time and
date of the handset.
Specifies the timezone of
the handset.
Restarts the base unit.
Description
Changes the network
settings of the base unit.
Current settings are
displayed as a highlight.
[ ]/[ ]: Select desired
item.
Setting
—
-12:00 －+13:00
Yes
No
Setting
–IPv4
–IPv6
–IPv4&IPv6
Default
—
—
Default
IPv4
145