Central Processing Unit (Cpu) - Viglen Vig565s Manual

Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA775 socket designed for the
Intel® Pentium® 4 processor in the 775-land package
CAUTION!
Allow time for the processor and heat sink to cool before touching either of them.
The Pentium® 4 processor together with Level 2 cache chips are housed in a
protective package.
The design of the VIG565S computer makes it a simple job to replace or upgrade the
processor. To do so please refer to the follow instructions below:
1. Read the warnings at the start of this chapter and ensure a static free environment
2. Remove the lid from the computer by removing the four screws at the rear of the
case
3. Locate the CPU module by referring to Figure 15 if necessary
4. Locate the heat sink clips, and remove heat sink (and unplug FAN cable)
5. Lift arm on Socket to release the CPU
6. Lift the CPU Vertically upwards until it is clear of the socket
You can now fit the replacement CPU and heat sink into the socket.
Installing the CPU
To install a CPU:
1. Locate the CPU socket on the motherboard.
Figure 15: Socket 775
31
Vig565s Motherboard Manual