Sharp MX-M1056 Quick Start Manual page 57

4
• Up to 200 sheets of paper can be loaded into each of the upper and lower trays.
• Insert the paper along the guides all the way into the tray.
• If the guide width is not correctly adjusted to match the paper width, paper may be jammed, skewed, or crease. Adjust
the paper guides to fit the width of the paper.
5
Output Tray
Upper Tray
Middle Tray
Lower Tray
Staple
Off
1 Staple
at Back
1 Staple Saddle
at Front Stitch
2 Staples
Tap the [Start] key to begin manual finishing.
6
BASE SCREEN OF MANUAL FINISHING MODE
Shows the selected
paper and output trays.
Selects an output tray for
finished paper.
Staples each set of
output.
Selects a staple position.
Staples the center of the booklet and
folds the booklet along the center.
Trims the excessive parts of booklet
folded along the center.
Inserter
Plain 1
Upper Tray
8½x11
Plain 1
Lower Tray
8½x11
Type and Size
Punch Fold
Accord-
Off Copies/Pages
Off
ion Fold
2/3-Hole Saddle Double
Punch Fold Fold
Half Fold Z-Fold
Start
C-Fold Detail
Output Tray
Upper Tray
Middle Tray
Lower Tray
Staple Punch
Off Off
2/3-Hole
1 Staple
Punch
at Back
1 Staple Saddle
at Front Stitch
2 Staples
Punches holes in paper.
MANUAL FINISHING
Load paper into the upper or lower
tray.
The paper orientation varies depending on the manual
finishing function.
► PAPER LOADING ORIENTATION (page 58)
Select the appropriate finishing
method and change the paper tray or
output tray as required.
CA
Inserter
Upper Tray
Lower Tray
Type and Size
Fold
Accord-
Off Copies/Pages
ion Fold
Saddle Double
Fold Fold
Half Fold Z-Fold
C-Fold
Detail
Performs paper folding.
Selects the type of
folding.
Selects a paper tray for
finishing.
Tap the [Type and Size] key
Plain 1
to set the paper type and
8½x11
paper size.
Plain 1
8½x11
Sets the number of copies
for output and the number of
sheets per set.
Resets all settings.
CA
Start
Starts finishing.
57