Switch Circuit Breakers - Yamaha AR195 Owner's/Operator's Manual

Instrument operation
TIP:
Once the reverse RPM control is activated,
pushing the plus side of the no-wake
mode/cruise assist switch will increase the
available engine speed by approximately 500
rpm in 3 stages up to a maximum of 6000
rpm, and pushing the minus side will de-
crease the available engine speed. However,
the adjustment is limited to these 3 incre-
ments.
To deactivate the reverse RPM control:
Operate the remote control lever to decrease
the engine speed to less than 4500 rpm. The
LCD will return to the normal display and the
reverse RPM control will be deactivated.
52
Cruise

Switch circuit breakers

The electrical circuit for each switch is protect-
ed by a circuit breaker. If the button under a
switch pops out, push it back in with your fin-
ger. If it pops out again, ask a Yamaha Boat
Dealer to inspect the electrical system.
BILGE BLOWER
1
1 Switch circuit breaker
CTSY
NAV/ANC
LIGHTS
1
1 Switch circuit breaker
HORN