Switch Circuit Breakers - Yamaha 212X 2016 Owner's/Operator's Manual

Instrument operation
TIP:
Once the reverse RPM control is activated,
pushing the plus side of the no-wake
mode/cruise assist switch will increase the
available engine speed by approximately
500 rpm in 3 stages up to a maximum of
6000 rpm, and pushing the minus side will de-
crease the available engine speed. However,
the adjustment is limited to these 3 incre-
ments.
To deactivate the reverse RPM control:
Operate the remote control levers to decrease
the engine speed to less than 4500 rpm. The
LCD of the starboard multi-function tachome-
ter will return to the normal display and the re-
verse RPM control will be deactivated.
54
Cruise

Switch circuit breakers

The electrical circuit for each switch is protect-
ed by a circuit breaker. If the button under a
switch pops out, push it back in with your fin-
ger. If it pops out again, ask a Yamaha Boat
Dealer to inspect the electrical system.
1 Switch circuit breaker
BILGE
NAVI
ANC
1 Switch circuit breaker
1
1
HORN
CTSY
LIGHTS