Pairing A Bluetooth Device - M-Audio BX3BT User Manual

Front Panel
1. Tweeter: This outputs the high frequencies.
2. Woofer: This outputs the low frequencies.
3. 1/8" (3.5 mm) TRS Aux Input: This stereo
1/8" (3.5 mm) TRS input can be used to
connect an MP3 player or other audio
source.
4. Headphones: Connect your 1/8" (3.5 mm)
headphones to this output to hear the mix
through your headphones. Note that while
headphones are connected to BX3 BT,
you will not be able to hear sound out of
your speakers until the headphones are
disconnected.
5. Power/Bluetooth LED: This LED will illuminate when the speakers are turned on. When
pairing to a Bluetooth device the LED will flash blue, and when pairing is successful it will
be lit solid blue.
6. Vol/Power: This knob is used to turn the speakers on and adjust their volume. To turn on,
simply turn up the knob. You will feel a click when the speakers turn on. To turn off, simply
turn the volume all the way down.

Pairing a Bluetooth Device

1. Turn on your Bluetooth device.
2. Power on BX3 BT and press the Bluetooth button to go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Power/Bluetooth LED
is flashing blue.
Note: If you have previously paired a device, BX3 BT will reconnect automatically.
3. Navigate to your Bluetooth device's setup screen, find BX3 BT and connect. If your
Bluetooth device prompts for a pairing code, enter 0000.
4. The Power/Bluetooth LED will be lit solid blue when a device is "paired" to BX3 BT.
To disconnect a paired Bluetooth device and enter pairing mode, press the Bluetooth button.
To connect to another device, repeat step 3.
6
1
2
5
3
6
4
1
2