Table of Contents
Advertisement
Troubleshooting
If you are experiencing problems, please check the following before asking
for repairs.
Problem
Impedance
measurement
Error
Measuring
Zeroing Error
Weight value
does not stabilize.
Nothing is displayed
even when the power
is turned on.
"OVERLOAD" is
Displayed LCD
displayed.
*
is displayed
Solution
•Hold the handgrips and electrodes firmly with
fingers and palms.
•Stand barefoot on the platform when
measuring.
•If the soles of the feet are dry, use a dropper to
apply about 0.5 mL of water onto the platform
before measurement.
•Reconfirm the input details.
•Turn off the power, remove everything from
the platform, then turn on the power and try
measuring again.
•Is this product set up on a surface that is
vibrating or near something that is vibrating?
•Is the platform tilted?
•Is something blocking the gaps in the platform?
•Remove any inserted objects.
•Confirm that the power is connected correctly.
•The weight to be measured exceeds the
maximum capacity.
•The measuring posture is incorrect.
The results can only be used as reference data.
See P.7 Incorrect Ways to Measure, Contact
Condition.
en
27
Advertisement
Table of Contents
