Troubleshooting - Tanita MC-980MA-N PLUS Instruction Manual

Troubleshooting

If you are experiencing problems, please check the following before asking
for repairs.
Problem
Impedance
measurement
error
Measuring
Zeroing error
Weight value
does not level.
Nothing is displayed
even when the power
is turned on.
Touch panel screen
Display
display is dark.
"------" is displayed.
Solution
•Hold the handgrips and electrodes firmly with
fingers and palms.
•Stand barefoot on the platform when
measuring.
•If the soles of the feet are dry, use a dropper to
apply about 0.5 mL of water before
measurement.
•Reconfirm the input details.
•Turn off the power, remove everything from
the platform, then turn on the power and try
measuring again.
•Is the analyzer placed on a vibrating surface?
•Is the measuring platform tilted?
•Is something blocking the gaps in the
measuring platform?
•Remove any inserted objects.
•Confirm that the power is connected correctly.
•Backlight failure. Contact the retailer where
you purchased the analyzer.
•The weight to be measured exceeds the
maximum capacity.
en
55