Adaptation To Different Types Of Gas - Smeg PV395LCNAU Manual

5.6 Adaptation to different types of gas

If other types of gas are to be used, the
nozzles must be replaced and the primary
air must be adjusted. In order to replace the
nozzles and adjust the burners, the hob top
must be removed.
Removing the hob top
1. Remove the grids from the hob.
2. Remove the flame-spreader crowns and
relative burner caps.
Installation
3. Pull the knobs and the knob bezels
upwards to remove them.
Between knob and the knob bezel
there is a spring that is not shown in
the figure.
4. Remove the screws fastening the top and
the plates corresponding to each burner
zone.
25