Related Manuals for John Thomas STEAMBENT MISSION C-34
Summary of Contents for John Thomas STEAMBENT MISSION C-34
- Page 1 ASSEMBLY INSTRUCTIONS : STEAMBENT MISSION CHAIR RTA Description : C-34 Item No. Printed in Vietnam ITEM NO : C-34 ISSUED MAY 06, 2015 - 1 -...
- Page 2 BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to beginning assembly, however, make sure all parts and hardware are included and free of obvious defect. If a part is missing or defective, please contact the store where purchased.
- Page 3 HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: Description Sketch Description Sketch Short bolt Medium bolt ( M6x40mm) (M6x60mm) Long bolt Medium Screw (M6 x 80mm) (M4 x 35mm)
- Page 4 STEP 2 Attach front legs (D) to the seat frame (B) with bolts (2), and washers (6) and (7). Tighten with Allen key (8). Place side stretchers (E) and middle stretcher (F) between front and back legs. Attach stretchers with the screws (4) and ( 5) as shown below.
Need help?
Do you have a question about the STEAMBENT MISSION C-34 and is the answer not in the manual?
Questions and answers