Hyundai HYC40Li Instruction Manual page 19

Assembly and Operation (Continued)
Starting
1.Switching on and off (See fig. A)
Check the voltage and current supply: The voltage and current supply must comply with the ratings on the type
plate.
For switching on the machine, press the lock-off button(3), then fully press the on/off switch(2) and hold in this
position. The lock-off button(3) can now be released. For switching off, release the on/off switch(2).
2.Fill the Oil Reservoir (See fig. B)
Check oil level gauge (19) prior to starting and regularly during operation. Refill oil when oil level is low. The oil
tank filling will last approx. 16minutes, depending on sawing intensity and stops. (Fig. B) Check new replaced
chain tension approx. every 10 minutes during operation.
B
19