Hyundai HYC40Li Instruction Manual page 16

Assembly and Operation
Chain and chain bar assembly:
Chain and Chain Bar Assembly
- Unpack all parts carefully.
- Place the chain saw on any suitable flat surface with the motor facing downwards.
- Fit the chain onto the drive sprocket and guide the chain bar. So that the fastening bolt lit into the keyway of the
chain bar. Check if all parts are seated properly and hold chain and chain bar in a level position.
- Fit cover. Check that arrows are still aligned
- Use the chain tension knob to get the correct tension in the chain. Finally tighten the sprocket cover knob.
Battery Pack Assembly
Put the battery pack(10) as shown above, taking care to press any button to prevent accidental Starting.
16