HP LD4201 User Manual page 32

Digital signage displays

Hide thumbs Also See for LD4201:

Table of Contents

Connect an HDMI to DVI signal cable to the HDMI/DVI port on the display, and then to the

●

DVI port on the media player/computer.

For AUDIO input from the media player/computer (this is only needed with DVI input signal

connections), connect the RCA-PC audio cable (cable not included) to the display and to the

Audio OUT ports on the media player/computer, then connect the display power cord.

NOTE:

cores to maintain standard compliance for this product.

Figure 3-30

Select an input signal.

Press the INPUT button on the remote control, select the HDMI/DVI input signal, and then press

the OK button to save.

Or, press the

then press the

Chapter 3 Setting up the display

Use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite

Connecting the HDMI to DVI signal cable

INPUT

button on the back of the display, select the HDMI/DVI input signal, and

AUTO/SET

button to save.

ENWW

Table of Contents

Ld4210 Ld710 Ld4710