Serial No. Check (Command: F Y); S/W Version (Command: F Z); Input Select (Command: X B) - HP LD4201 User Manual
Digital signage displays
Hide thumbs
Also See for LD4201:
- Specifications (2 pages) ,
- Quickspecs (9 pages) ,
- User manual (160 pages)
Table of Contents
Advertisement
[o][][Set ID][][OK/NG][Data][x]
47. Serial no. Check (Command: f y)
To read the serial numbers
Transmission
[f][y][][Set ID][][Data][Cr]
[Data]
Acknowledgement
[y][][Set ID][][OK/NG][Data1]to[Data13][x]
[Data]
48. S/W Version (Command: f z)
Check the software version.
Transmission
[f][z][][Set ID][][Data][Cr]
[Data]
Acknowledgement
[z][][Set ID][][OK/NG][Data][x]
49. Input Select (Command: x b)
To select input source for the display.
Transmission
[x][b][][Set ID][][Data][Cr]
88
Appendix C Command reference
Data FF (to read the serial numbers)
The data format is ASCII Code.
FFH: Read
ENWW
Advertisement
Table of Contents
