Using The Accessory Rails; Removing The Monitor Pedestal Base - HP L1750 User Manual

Using the Accessory Rails

The monitor features accessory rails on the rear that can be used to mount optional devices, such as
the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional device
for detailed mounting instructions.
Figure 3-15

Removing the Monitor Pedestal Base

You can remove the monitor panel from the pedestal base to install the panel on a wall, a swing arm,
or other mounting fixture.
CAUTION:
power and signal cables are both disconnected. If the monitor has a connected audio cable, disconnect
it.
1. Disconnect and remove the signal and power cables from the back of the monitor.
2. Lay the monitor face down on a flat surface.
16 Chapter 3 Setting Up the Monitor
Using the Accessory Rails Feature
Before beginning to disassemble the monitor, be sure the monitor is turned off and the