Download  Print this page

Using The Accessory Rails; Removing The Monitor Pedestal Base - HP LP1965 User Manual

19", 20" and 24" lcd monitors.
Hide thumbs

Advertisement

Using the Accessory Rails

The monitor features accessory rails on the rear that may be used to mount optional devices, such
as the HP speaker bar, to attach to the LCD. Refer to the documentation included with the optional
device for detailed mounting instructions.
Figure 3-13

Removing the Monitor Pedestal Base

You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing
arm, or other mounting fixture.
This monitor has a Quick Release mechanism that allows you to easily remove and replace the
monitor panel to the pedestal base.
CAUTION
and the power and signal cables are both disconnected. If the monitor has a connected audio
cable, disconnect it.
1.
Disconnect and remove the signal and power cables from the back of the monitor.
2.
Slide the quick release latch (1) on the pedestal base to the side (either right or left).
14
Chapter 3 Setting Up the Monitor
Using the Accessory Rails Feature
Before beginning to disassemble the monitor, be sure the monitor is turned off

Advertisement

Table of Contents

   Related Manuals for HP LP1965

This manual is also suitable for:

Lp2065Lp2465

Comments to this Manuals

Symbols: 0
Latest comments: